Part Number Hot Search : 
LBN7004 P7831124 03P4M ATA6832 SMCG51A AN32058A SMCG51A TS13003B
Product Description
Full Text Search
 

To Download STF13N60DM2 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  december 2016 docid029201 rev 2 1 / 13 thi s is information on a product in full production. www.st.com STF13N60DM2 n - channel 600 v, 0.310 typ., 11 a mdmesh? dm2 power mosfet in a to - 220fp package datasheet - production data figure 1 : internal schematic diagram features order code v ds r ds(on) max. i d STF13N60DM2 600 v 0.365 11 a ? fast - recovery body diode ? extremely low gate charge and input capacitance ? low on - resistance ? 100% avalanche tested ? extremely high dv/dt ruggedness ? zener - protected applications ? switching applica tions description this high voltage n - channel power mosfet is part of the mdmesh? dm2 fast recovery diode series. it offers very low recovery charge (q rr ) and time (t rr ) combined with low r ds(on) , rendering it suitable for the most demanding high efficiency converters and ideal for bridge topologies and zvs phase - shift converters. table 1: devic e summary order code marking package packing STF13N60DM2 13n60dm2 to - 220fp tube d(2, t ab) g(1) s(3) am01476v1_tab t o-220f p
contents STF13N60DM2 2 / 13 docid029201 rev 2 contents 1 electrical ratings ................................ ................................ ............. 3 2 electrical characteristics ................................ ................................ 4 2.1 electrical characteri stics (curves) ................................ ...................... 6 3 test circuits ................................ ................................ ..................... 8 4 package information ................................ ................................ ....... 9 4.1 to - 220fp package information ................................ ...................... 10 5 revision history ................................ ................................ ............ 12
STF13N60DM2 electri cal ratings docid029201 rev 2 3 / 13 1 electrical ratings table 2: absolute maximum ratings symbol parameter value unit v gs gate - source voltage 25 v i d drain current (continuous) at t case = 25 c 11 (1) a drain current (continuous) at t case = 100 c 7 (1) i dm (2) drain current (pulsed) 44 (1) a p tot total dissipation at t case = 25 c 25 w dv/dt (3) peak diode recovery voltage slope 40 v/ns dv/dt (4) mosfet dv/dt ruggedness 50 v iso insulation withstand voltage (rms) from all three leads to external heat sink (t = 1 s; t c = 25 c) 2500 v t stg storage temperature range - 55 to 150 c t j operating junction temperature range notes: (1) limited by maximum junction temperature (2) pulse width limited by safe operating area. (3) i sd 11 a, di/dt 900 a/s; v ds peak < v (br)dss , v dd =400 v. (4) v ds 480 v. table 3: thermal data symbol parameter value unit r thj - case thermal resistance junction - case 5 c/w r thj - amb thermal resistance junction - ambient 62.5 table 4: avalanche characteristics symbol parameter value unit i ar avalanche current, repetitive or not repetitive (pulse width limited by t jmax ) 2.5 a e as single pulse avalanche energy (starting t j = 25 c, i d = i ar , v dd = 50 v) 340 mj
electrical characteristics STF13N60DM2 4 / 13 docid029201 rev 2 2 electrical characteristics (t case = 25 c unless otherwise specified) table 5: static symbol parameter test conditions min. typ. max. unit v (br)dss drain - source breakdown voltage v gs = 0 v, i d = 1 ma 600 v i dss zero gate voltage drain current v gs = 0 v, v ds = 600 v 1.5 a v gs = 0 v, v ds = 600 v, t case = 125 c (1) 100 i gss gate - body leakage current v ds = 0 v, v gs = 25 v 10 a v gs(th) gate threshold voltage v ds = v gs , i d = 250 a 3 4 5 v r ds(on) static drain - source on - resistance v gs = 10 v, i d = 5.5 a 0.310 0.365 notes: (1) defined by design, not subject to production test. table 6: dynamic symbol parameter test conditions min. typ. max. unit c iss input capacitance v ds = 100 v, f = 1 mhz, v gs = 0 v - 730 - pf c oss output capacitance - 38 - c rss reverse transfer capacitance - 0.9 - c oss eq. (1) equivalent output capacitance v ds = 0 to 480 v, v gs = 0 v - 70 - pf r g intrinsic gate resistance f = 1 mhz, i d = 0 a - 5.1 - q g total gate charge v dd = 480 v, i d = 11 a, v gs = 10 v (see figure 15: "test circuit for gate charge behavior" ) - 19 - nc q gs gate - source charge - 4.4 - q gd gate - drain charge - 9.9 - notes: (1) c oss eq. is defined as a constant equivalent capacitance giving the same charging time as c oss when v ds increases from 0 to 80% v dss . table 7: switching times symbol parameter test conditions min. typ. max. unit t d(on) turn - on delay time v dd = 300 v, i d = 5.5 a r g = 4.7 , v gs = 10 v (see figure 14: "test circuit for resistive load switching times" and figure 19: "switching time waveform" ) - 12.3 - ns t r rise time - 4.8 - t d(off) turn - off delay time - 42.5 - t f fall time - 10.6 -
STF13N60DM2 electrical characteristics docid029201 rev 2 5 / 13 table 8: source - drain diode symbol parameter test conditions min. typ. max. unit i sd source - drain current - 11 a i sdm (1) source - drain current (pulsed) - 44 a v sd (2) forward on voltage v gs = 0 v, i sd = 11 a - 1.6 v t rr reverse recovery time i sd = 11 a, di/dt = 100 a/s, v dd = 60 v (see figure 16: "test circuit for inductive load switching and diode recovery times" ) - 90 ns q rr reverse recovery charge - 252 nc i rrm reverse recovery current - 5.6 a t rr reverse recovery time i sd = 11 a, di/dt = 100 a/s, v dd = 60 v, t j = 150 c (see figure 16: "test circuit for inductive load switching and diode recovery times" ) - 170 ns q rr reverse recovery charge - 667 nc i rrm reverse recovery current - 8.6 a notes: (1) pulse width is limited by safe operating area. (2) pulse test: pulse duration = 300 s, duty cycle 1.5%. table 9: gate - source zener diode symbol parameter test conditions min. typ. max. unit v (br)gso gate - source breakdown voltage i gs = 250 a, i d = 0 a 30 - - v the built - in back - to - back zener diodes are specifically designed to enhance the esd performance of the device. the zener voltage facilitates efficient and cost - effective device integrity protection, thus eliminating the need for additional external componentry.
electrical characteristics STF13N60DM2 6 / 13 docid029201 rev 2 2.1 electrical characteristics (curves) figure 2 : safe operating area figure 3 : thermal impedance figure 4 : output characteristics figure 5 : transfer characteristics figure 6 : gate charge vs gate - source voltage figure 7 : static drain - source on - resistance
STF13N60DM2 electrical char acteristics docid029201 rev 2 7 / 13 figure 8 : capacitance variations figure 9 : normalized gate threshold voltage vs temperature figure 10 : normalized on - resistance vs temperature figure 11 : normalized v(br)dss vs temperature figure 12 : output capacitance stored energy figure 13 : source - drain diode forward charact eristics
test circuits STF13N60DM2 8 / 13 docid029201 rev 2 3 test circuits figure 14 : test circuit for resistive load switching times figure 15 : test circuit for gate charge behavior figure 16 : test circuit for inductive load switching and diode recovery times figure 17 : unclamped inductive load test circuit figure 18 : unclamped inductive waveform figure 19 : switching time waveform
STF13N60DM2 package information docid029201 rev 2 9 / 13 4 package information in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
package information STF13N60DM2 10 / 13 docid029201 rev 2 4.1 to - 220fp package informa tion figure 20 : to - 220fp package outline
STF13N60DM2 package information docid029201 rev 2 11 / 13 table 10: to - 220fp package mechanical data dim. mm min. typ. max. a 4.4 4.6 b 2.5 2.7 d 2.5 2.75 e 0.45 0.7 f 0.75 1 f1 1.15 1.70 f2 1.15 1.70 g 4.95 5.2 g1 2.4 2.7 h 10 10.4 l2 16 l3 28.6 30.6 l4 9.8 10.6 l5 2.9 3.6 l6 15.9 16.4 l7 9 9.3 dia 3 3.2
revision history STF13N60DM2 1 2 / 13 docid029201 rev 2 5 revision history table 11: document revision history date revision changes 08 - apr - 2016 1 first release. 07 - dec - 2016 2 document status promoted from preliminary to production data.
STF13N60DM2 docid029201 rev 2 13 / 13 important notice C please read carefully stmicroelectronics nv and its subsidiaries (st) reserve the right to make changes, corrections, enhancements, modifications , and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant information on st products before placing orders. st products are sold pursuant to sts terms and conditions of sale in place at the time of or der acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and s t assumes no liability for application assistance or the design of purchasers products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information se t forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2016 stmicroelectronics C all rights reserved


▲Up To Search▲   

 
Price & Availability of STF13N60DM2

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X